x
21.webp)
Cast Acrylic Sheet MC® is the brand name of the general purpose cell cast acrylic sheets manufactured by PT Margacipta Wirasentosa. The raw material, methyl methacrylate (MMA) is polymerized into MC® cast acrylic sheet. Marga Cipta Cast Acrylic Sheet is produced in batches between two sheets of superior quality glass. The finished product offers strength and superior top qualities not available in other types of acrylic sheet.
Product Specification
The MC® Value Proposition
Colors and Pattern
Sheets available in: (buat sub produk)
Cast Acrylic Sheet Chemical Features
(Resistant Properties to Chemical Agents)
| Sulfuric Acid 60°C | Stable to 60% |
| Hydrochloric Acid 60°C | Stable to 30% |
| Nitric Acid 60°C | Stable to 20% |
| Caustic Soda 60°C | Stable to 50% |
| Aqueous Ammonia 60°C | Stable to 18% |
| Acetic Acid 60°C | Dissolve |
| Ethyl Acetate | Dissolve |
| Toluene | Dissolve |
| Ethylene Dichloride | Dissolve |
| Benzene | Dissolve |
| Methyl Alcohol | Dissolve |
| Diemethyl Formamide | Dissolve |
| Acetone | Dissolve |
| Aniline | Dissolve |
Average Physical Properties
| Properties | Unit | |
| Specific Gravity | . | 1.19 |
| Hardness | . | HNC – 96 |
| Water Absorption | % | 0.35 |
| Tensile Strength: Tensile strength at yield Tensile strength of break Tensile modulus Elongation at break |
Kg/cm² Kg/cm² Kg/cm² % |
709 696 29,532 8 |
| Bending Strength: Flexural Strength Flexural Modulus |
Kg/cm² Kg/cm² |
1.052 31,264 |
| Impact Strength | Kg/cm² | 1.1 |
| Shear Strength | Kg/cm² | 600 – 650 |
| Transmittancy: Full rays Parallel rays |
% % |
93.3 HAZE= 0.27 |
| Specific Heat | Cal/g/°C | 0.35 |
| Heat Distortion Temperature (4.6kg/cm) | °C | 100 |
| Coefficient of Heat Conductivity | Cal/s.cm² | 4.5 X 10-4 |
| Coefficient of Linear Expansion | Cm/cm/°C | 6.5 X 10-5 |
| Ultimate Temperature of Continuous Operation | °C | 60 – 90 |
| Flammability | Mm/min | 33 |
| Surface Resistivity at 28°C | Ohm | >1016 |
| Volume Resistivity | Ohm cm | > 10-15 |
| Thermoforming Ranges | °C | 140 – 180 |
| Dielectric Strength | Kv/Mm | 20 |
Product Specification
The MC® Value Proposition
Colors and Pattern
Sheets available in: (buat sub produk)
Cast Acrylic Sheet Chemical Features
(Resistant Properties to Chemical Agents)
| Sulfuric Acid 60°C | Stable to 60% |
| Hydrochloric Acid 60°C | Stable to 30% |
| Nitric Acid 60°C | Stable to 20% |
| Caustic Soda 60°C | Stable to 50% |
| Aqueous Ammonia 60°C | Stable to 18% |
| Acetic Acid 60°C | Dissolve |
| Ethyl Acetate | Dissolve |
| Toluene | Dissolve |
| Ethylene Dichloride | Dissolve |
| Benzene | Dissolve |
| Methyl Alcohol | Dissolve |
| Diemethyl Formamide | Dissolve |
| Acetone | Dissolve |
| Aniline | Dissolve |
Average Physical Properties
| Properties | Unit | |
| Specific Gravity | . | 1.19 |
| Hardness | . | HNC – 96 |
| Water Absorption | % | 0.35 |
| Tensile Strength: Tensile strength at yield Tensile strength of break Tensile modulus Elongation at break |
Kg/cm² Kg/cm² Kg/cm² % |
709 696 29,532 8 |
| Bending Strength: Flexural Strength Flexural Modulus |
Kg/cm² Kg/cm² |
1.052 31,264 |
| Impact Strength | Kg/cm² | 1.1 |
| Shear Strength | Kg/cm² | 600 – 650 |
| Transmittancy: Full rays Parallel rays |
% % |
93.3 HAZE= 0.27 |
| Specific Heat | Cal/g/°C | 0.35 |
| Heat Distortion Temperature (4.6kg/cm) | °C | 100 |
| Coefficient of Heat Conductivity | Cal/s.cm² | 4.5 X 10-4 |
| Coefficient of Linear Expansion | Cm/cm/°C | 6.5 X 10-5 |
| Ultimate Temperature of Continuous Operation | °C | 60 – 90 |
| Flammability | Mm/min | 33 |
| Surface Resistivity at 28°C | Ohm | >1016 |
| Volume Resistivity | Ohm cm | > 10-15 |
| Thermoforming Ranges | °C | 140 – 180 |
| Dielectric Strength | Kv/Mm | 20 |